date revision 55PC0214 upper spec limit weight ( lbs/1000 ft. ) lower spec limit diameter ( in.) maximum resistance at 20c (ohms/1000 ft.) finished wire target value upper spec limit conductor diameter ( in.) lower spec limit target value 55PC0214-26-* 55PC0214-24-* 55PC0214-22-* 55PC0214-20-* 55PC0214-18-* 55PC0214-16-* part number 1/ conductor stranding (number x awg) conductor - silver-coated high strength copper alloy construction details .0183 .0233 .0293 .0375 .0464 .0527 upper spec limit .0175 .0225 .0285 .0365 .0452 .0514 target value title specification control drawing .0345 .0395 .0455 .0540 .0635 .0710 .0362 .0412 .0472 .0557 .0654 .0730 insulation - radiation-crosslinked, modified etfe 1.52 2.13 3.06 4.57 6.90 8.70 1.38 1.98 2.90 4.38 6.59 8.37 .0328 .0378 .0438 .0523 .0616 .0690 .0191 .0241 .0301 .0385 .0476 .0538 19 x 38 19 x 36 19 x 34 19 x 32 19 x 30 19 x 29 44.8 28.4 17.5 10.7 6.8 5.3 this specification sheet forms a part of the latest issue of raychem specifiction 55pc. 26 24 22 20 18 16 wire size (awg) 07-09-04 b wire, radiation-crosslinked, modified, etfe-insulated, general purpose, light airframe temperature rating: 200c maximum continuous conductor temperature voltage rating: 600 volts (rms) at sea level color: white preferred crosslink verification: 300 3c for 1 hour identification and color striping durability: 125 cycles (250 strokes) (minimum), 500 g weight insulation elongation and tensile strength: total insulation, elongation, 50% (minimum) tensile strength, 5000 lbf/in2 (minimum) insulation flaws: spark test, 3.0 kv (rms) impulse dielectric test, 8.0 kv (peak) insulation thickness: .008 in. (nominal) total insulation shrinkage: 230 3c for 1 hour, 0.125 in.(maximum) in 12 in. voltage withstand test (post environmental): 2500 volts (rms) part number: the "*" in the part numbers above shall be replaced by color code designators. 1/ example: awg 22, white: 55PC0214-22-9 awg 22, white with black stripe: 55PC0214-22-90 wire ratings and additional r equirements r r r r r wire & cable 501 oakside avenue redwood city, ca 94063-3800 phone: 1-800-227-8816 fax: 1-650-361-6297 1/ colors and color code designators shall be in accordance with mil-std-681. other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. dimensions are in inches and, unless otherwise designated, are nominal page 1 of 1 this specification sheet takes precedence over documents referenced herein. referenced documents shall be of the issue in effect on date of invitation for bid. tyco electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any sp ecification, without notification to buyer. users should evaluate the suitability of this product for their application. specifications are subject to change without noti ce.
|
